 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| MBR10150CT, MBRF10150CT Dual Common-Cathode High-Voltage Schottky Barrier Rectifiers Reverse Voltage 150 Volts Forward Current 10.0 Amperes Features Guardring for overvoltage protection Low power loss, high efficiency Low forward voltage drop High frequency operation Solder Dip 260 C, 40 seconds For use in high frequency inverters, free wheeling and polarity protection applications Mechanical Data Case: TO-220AB, ITO-220AB Epoxy meets UL-94V-0 Flammability rating Terminals: Matte Tin plated (E3 Suffix) leads, solderable per J-STD-002B and JESD22-B102D Mounting Torque: 10 in-lbs maximum Polarity: As marked Weight: 0.08 ounce, 2.24 grams TO-220AB ITO-220AB Dimensions in millimeters 360 Maximum Ratings and Electrical Characteristics ( TC = 25oC unless otherwise noted ) Parameter Maximum repetitive peak reverse voltage Working peak reverse voltage Maximum DC blocking voltage Maximum average forward rectified current (See Fig. 1) Total device Per leg Symbol VRRM VRWM V DC IF(AV) IFSM IRRM dv/dt MBR10150CT 150 150 150 10 5.0 160 1.0 10,000 Unit Volts Volts Volts Amps Amps Amp V/us Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) per leg Peak repetitive reverse current per leg at tp = 2.0us, 1KHz Voltage rate of change (rated VR) Maximum instantaneous forward voltage per leg (Note 4) at IF=5.0A, TJ=25oC at IF=5.0A, TJ=125oC at IF=10A, TJ=25oC at IF=10A, TJ=125oC Maximum reverse current per leg at working peak reverse voltage (Note 4) TJ=25oC TJ=125 C o 0.88 VF 0.72 0.96 0.80 5.0 IR 1.0 RJC VISOL TJ, TSTG MBR 2.4 / MBRF 4.5 4500 (Note 1) 3500 (Note 2) 1500 (Note 3) -55 to +150 o Volts uA mA C/W Typical thermal resistance per leg RMS Isolation voltage (MBRF type only) from terminals to heatsink with t = 1.0 second, RH < 30% Operating junction and storage temperature range Notes: Volts o C 1. Clip mounting (on case), where lead does not overlap heatsink with 0.110" offset 2. Clip mounting (on case), where leads do overlap heatsink 3. Screw mounting with 4-40 screw, where washer diameter is < 4.9 mm (0.19") 4. Pulse test: 300us pulse width, 1% duty cycle 361 RATINGS AND CHARACTERISTIC CURVES ( TA = 25oC unless otherwise noted ) 362 |
Price & Availability of MBRF10150CT
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |